Single-Panel Builds for Tubs, Wet Rooms & Half-Walls
Every panel runs in 3/8" tempered safety glass — up to four times stronger than annealed and the right spec for the typical 60"–72" tub-side install. We step up to 1/2" heavy glass for taller (above 60") or wider (above ~36") builds and for deck-mounted installs with floor-only support. Heavy Glass with Inline Panel →
The configuration is defined by where it lands. A bathtub-side build mounts at the head of a freestanding or alcove tub doubling as a shower — the most common AGG install and the answer for a sculptural tub. A beside-toilet build runs between toilet and adjacent shower for overspray control in compact baths. A wet-room transition build anchors the boundary between a curbless shower and the dry zone. A half-wall topper sits atop a knee-wall and extends the partition to ceiling height without closing the room in.
Mounting is CRL (C.R. Laurence) clamp-and-channel hardware — wall-only on tub-side and topper installs, wall-plus-floor U-channel on full-height tub and wet-room builds, deck-mount U-channel on freestanding-tub applications. Wall-mounted panels need studs or solid blocking behind the tile. Every panel is fabricated to the exact opening. No kit sizes.